Single weld on front shock absorber top mounting brackets. Laser cut and fabricated in mild steel, they fit exactly onto 1.5 inch or 38.1mm CDS steel tube, supplied in bare metal ready for welding. Typically welded at right angles to a top rail cross bar, they are suited for use with King or Fox off road shocks and are designed to tranfer the loads into the chassis. They have a 1.25 inch internal opening, for use with 1/2 inch bolts, 2 1/2 inches in length and ideally clamped with our SAE 8 heavy duty plain washers and nyloc nuts. Non-handed, 2 per vehicle.
Priced EachWeld-on Chassis Brackets for King or Fox Off Road ShocksLaser Cut and Fabricated in Mild Steel with 1/2 inch HolesSuitable for Either Side of the Chassis, 2 used per Vehicle