Chromoly steel weld in chassis tube connectors, manufactured by Latest Rage, these joints allow the creation of removable chassis sections. Often used to create detachable front or rear chassis sections, to allow better access or to enable customisation of vehicles depending on other components used. These connectors feature a 3/8" UNC high tensile steel bolt connection and are suited to 1.25" steel tube with a 0.095" wall thickness, in the UK they work best with a 32mm CDS steel tube with a 2.5mm wall thickness, a common size in Autograssers and lightweight buggies. The diameter of the connector section that slides into the CDS tube is 26.78mm (1.0545"). 32mm CDS tube with a 2.5mm wall thickness has an ID of 27mm. They are simply pushed into the tube and welded into each side, paying attention to how any sections need to come apart and their orientation to offer the greatest strength. Sold in pairs only, priced individually.
Priced EachFor 1.25" Steel Tube with a 0.095" WallChromoly Steel in a Single Bolt DesignPerfect for Off Road Karts and Buggies