3/8" bore high misalignment rod end spacers for 1/2" rod ends and spherical bearings. Manufactured in the USA from the finest heat treated 17-4 stainless steel, these spacers are the best in the business and increase bearing misalignment angles when used in a standard rod end, making them far better suited for steering and suspension applications.
Misalignment angles are increased from typically 9° to around 40° and using side spacers is more cost effective than using equal specification high misalignment bearings. These spacers have a protruding width of 0.28" and reduce the rod end bore from 1/2" down to 3/8". With both spacers fitted, the assembled width is 1.185" overall. Your chassis brackets should be set and welded to suit, remembering to allow for any depth of powder coating or paintwork.
Priced Each2 Side Spacers Used for Each BearingIncreased Bearing Articulation to 40°For Spherical Bearings and Rod EndsPerfect Fit into 1/2" Bore Bearings