1/2" bore high misalignment rod end spacers for 5/8" rod ends and spherical bearings. Manufactured in the USA from the finest heat treated 17-4 stainless steel, these spacers are the best in the business and increase bearing misalignment angles when used in a standard rod end, making them far better suited for steering and suspension applications.
Misalignment angles are increased from typically 12° to around 40° and using side spacers is more cost effective than using equal specification high misalignment bearings. These spacers reduce the rod end bore down from 5/8" to 1/2" and with both spacers fitted, have assembled widths of 1.25", 1.50" and 1.75" respectively. Chassis brackets should set to suit, remembering to allow for any depth of powder coating or paintwork.
Priced Each2 Side Spacers Required for Each BearingBearing Articulation Increased to Nearer 20°Also Suitable for use with Spherical BearingsSpacers Push Perfectly into 5/8" Bore Bearings