Armtech Hybrid Battery Isolation System

Armtech Hybrid Battery Isolation System

Armtech

  • FIA Compliant Battery Isolator
  • System Operating Voltage 9-16V
  • 12v Negative Earth Vehicles Only
  • Our Price:  £254.00(Exc. 20% VAT)(£304.80 Inc. VAT)Earn 254 Loyalty Points
    +

    Availability:  

    In stock  

    In stock

    Part Number:  70BC06

    Armtech Hybrid Battery Isolation system. This electro-mechanical device is the latest version and ideal to replace a standard type master switch and it ensures complete isolation of the battery, whilst protecting your alternator, with all components contained into one box, without external resistors or untidy wiring.

    Armtech's Hybrid Battery Isolator is a heavy duty control box that should ideally be mounted close to the battery. The system includes 3 remotely mounted switches, which control the main unit, which are an ON and OFF button that are cockpit mounted to be operable by the driver and a waterproof external OFF switch, for opertion by marshals or incident attendees in the event of an accident. Additional switches can be purchased and added elsewhere as required. A warning light on the main box illuminates when the unit is armed, as does another led lamp, connected to the driver's ON switch.

    All switches are to be wired to the main unit using low voltage/current cable (not supplied). If in the event of an accident there is any severence of these ancillary cables, the unit will automatically be turned off. Supplied complete with a safety sticker sheet and full installation and operation instructions.

    Priced Each

  • Genuine FIA Approved Autolec Battery Master Switch
  • Fit one of the Other Copy Brands at Your Own Risk!
  • Supplied Including a Resistor and a Wiring Diagram

  • FIA Compliant Battery Isolator
  • System Operating Voltage 9-16V
  • 12v Negative Earth Vehicles Only
  • Maximum Switching Current 1000A
  • Maximum Alternator Current 250A
  • Continuous Current Handling 250A
  • Operating Temp Range -25°C to +85°C
  • Overall System Dimensions 156x69x62mm
  • Overall System Weight (approx) 700g
  • Built-In Alternator Protection Circuit
  • Control Box Dimensions 109x69x54mm
  • WIRING DIAGRAM